-
### Is your feature request related to a problem? Please describe.
Create a documentation on how to connect multiple Renogy batteries to one serial adapter.
### Describe the solution you'd like
_No…
-
Test compatibility of Renogy Battery [RBT50LFP48S](https://www.renogy.com/support/downloads/batteries/lithium-batteries/48v-50ah-smart-lithium-iron-phosphate-battery-rbt50lfp48s.html)
-
Hi,
I tried to get my new Renogy RBT12100LFP-BT working, the example.py throws an error.
The connections seems to be established, but reading values fails.
```
INFO:root:Init RoverClient: RNGP…
-
Multiple RS485 modules on the same interface
-
Hi I have this working beautifully with a Home Assistant setup in my caravan.
Except for one point, my setup has 2 renogy smart batteries linked in series and connected via a single lead to the BT de…
-
### Is your feature request related to a problem? Please describe.
_No response_
### Describe the solution you'd like
It would be great if someone could add support for Renogy MPPTs, just like the …
Yoeky updated
3 months ago
-
Renogy has a series of [MPTT solar charge controllers](https://www.renogy.com/wanderer-10a-pwm-charge-controller/).
They have an RS232 port that one can hook up a bluetooth module to: the [BT-1](http…
rb2k updated
6 months ago
-
I don't expect to be able to write much code until we have access to the solar charger. I'm just making this issue now as a place to put research and documentation.
Renogy is surprisingly supporti…
-
I used your info to successfully connect an Arduino MKR1010 to a Renogy Wanderer 10A (model # RNG-CTRL-WND10) charge controller. The MKR1010 natively has Serial1 on pins 13 (RX) and 14 (TX).
In the…
-
Registries 5018-5021 report in .1C, so 80 would be 8C
Registry 5103 is the status of the battery heater. 0-255 (0 being off, 255 being on-high) Not sure on the intermediate values but it shuts off at…