-
The ability to download pre-built firmware that works on your Makerbot is one of the best features of ReplicatorG. To do this for RepRap is a bit more difficult since there is much more variation in e…
-
Trying to configure S42B v1.1 with Duet Reprap Firmware v3 Timing/Pulse
This is what I am using now
M569 P8 R0 S0 T3.33:3.33:3:0
What settings should I be using for the S42B v 1.1 ?
Refere…
-
Does anyone know how to get this LCD working and the correct way to configure it in Klipper?
-
## Blogs
- https://www.emoe.xyz/all-about-electronics/
- https://www.analog.com/cn/resources/reference-designs.html
- https://www.envox.eu/
- https://bitbucket.org/christandlg/workspace/repositori…
-
**Describe the bug**
No matter what printer i Choose in Cura, a thumbnail is generated in the G-code output. Only one of my printers are running duet/RRF. The others are older 8-bit board marlin and …
-
Rerap 2 and 3 firmware configuration data missing.
-
Cura now has its own "UltiGCode" flavor as well as a "Reprap (Volumetric)" (due to the begging a pleading of yours truly). The difference between these two modes is that UltiGCode has a few special co…
-
Hi Michael,
Thank you for the site - it works wonderful if you have Marlin. I have recently changed to a Duet2 setup, and now the acceleration/jerking pages are an issue as the commands are differe…
-
[https://reprap.org/wiki/RepRap_Firmware](https://reprap.org/wiki/RepRap_Firmware)
and perhaps talking to DC42 in the forums @ [https://forum.duet3d.com/](https://forum.duet3d.com/)
Duet3d has an ex…
-
DOes anyone know the correct pinouts for the reprap discount LCD? the really basic one with 4 lines of text, and the encoder?
I think the pins file is wrong, i have checked both the main release of…