-
This can be useful in some cases, and it also provides permanent access to photos that should have been destroyed, which is shameless, but I still want this feature.So I really want you to add this fe…
-
The following files are not referenced in any markdown file:
./src/assets/images/support/hc-import-status_codes_error_by_data_center.png
./src/assets/images/support/hc-import-web_traffic_status_codes.…
-
I had that idea after investigating stringing issues that fused parts of a print-in-place flexible model.
Prusa Slicer has the option of rendering retractions. It's useful to be able to render tha…
-
I'm not sure where to post an issue about this, but it seems that the retraction template is at least partially hardcoded into Nanodash, so I'm putting it here.
When I post a retraction in Nanodash…
-
I keep getting the same issue where if the printer thinks that there is a tool loaded i.e. leg1 is set to "tool_loaded": true and for whatever reason the filament is NOT loaded it will endlessly try a…
-
This is not necessarily a bug with your retraction tower, but I've exhausted all other explanations I could think of including printer firmware and calibration.
In short, the retraction tower fails…
-
### What happened?
When trying to generate Retraction Calibration on MacOS the app always crashes, this is the case with many older versions as well.
### Project file & How to reproduce
Press the R…
-
There are some issues with the ZYYX Pro 0.6mm retraction profile that cause some weird artifacts.
-
Printer retraction setting is not honored and is always hard-coded to 2mm.
-
### Is there an existing issue for this feature request?
- [X] I have searched the existing issues
### Is your feature request related to a problem?
Current retraction calibration method is time an…