-
Marauder is perfect but there should be a place for RF in it too
It would be truly incredible if many features were added such as copying RF signals, recording and replaying, monitor mode, jamming st…
-
Recording RF (433MHz) signals is okay. They are saved to the SD card without any problem.
When trying to transmit the signals, it does nothing. I analyzed the spectrum with other stickCplus2 and wh…
-
Hi,
is it possible to edit RF Bridge button signal sending time, like to mimic holding pressed remote button? I have some cheap tuya wifi/rf alarm, that works with rf sensors/remotes. And it not al…
-
## Issue Description ##
According to your Documents, as my understanding,
1. I need to use a Linux PC installed **srsUE** and a RF_front(e.g. USRP) to build a LTE signal transceiver
(User Terminal…
-
The current implementation of IR and RF Reading/Sniffing/Replay requires a successful decode the signals.
This works fine in many cases, but in some cases it may fail to decode (e.g. [Air Conditioner…
-
I think it would be very nice to have a way to, when sending anything via RF or IR, repeatedly send a signal over and over until manually stopped. You could place this in the menu when you choose a fi…
-
Hello Bruce!
I would like to advise a new introduction, but I don't know at all if it can be added, in general, do the same as flipper zero selection for opening gates, slagbaums and the rest
…
-
**Is your feature request related to a problem? Please describe.**
I need that any sensor will trigger the warning or critical warning signal (e.g. PIR movement) for the RF final testing of devices.
…
-
Here's the gist. I've just setup my range of consoles to be captured via the Elgato. When I use a console that transmits a composite signal through the usual RCA cables (i.e. a Playstation), it displa…
-
Hi All,
A cursory investigation into ML for RF signal processing (hls4ml4rf?) based on Jason's recommendations seems pretty promising. It turns out that DeepSig has several public resources that lo…
ejk43 updated
4 years ago