-
Hello Jakob,
i have here a NetSDR compatible SDR Receiver "Andrus MK1.5". Is it possible to add NetSDR Protocol as used also by RFspace SDR Radios?
73 Holger, DF6DBF
-
**Hardware**
- CPU: i913900k
- RAM: 32gb
- GPU: rtx4080
- SDR: Local
**Software**
Winsows11 23H2
**Bug Description**
After connecting to the device, it does not respond or crashes and sh…
-
Hello, I'm trying run the example https://github.com/righthalfplane/rfspace/blob/master/ofdm_loopback05.grc to transmit video file with a Hack RF as transmitter and another Hack RF as receiver, but wi…
-
I'am a newbie and I want to connect CubicSDR to radios over the Internet.
I found a list of RFSPACE SDR : http://sdranywhere.com/cloud/sdrweb.py
How to set the port ?
**50001** in this case
Do yo…
pyrog updated
2 years ago
-
**Describe the bug**
RSP1 Msi2500 board only works for seconds on GQRX and SDR++
**To Reproduce**
I tried with RTL-SDR dongle V2 and RSP2pro with GQRX and they work ok.
Then I replace the SDR wi…
-
I have been trying to BladeRF x115 work with SDRSharp without any luck. I tried with both a windows7 and a windows 10 machine but couldn't get it to work. I followed the following youtube link first.
…
-
Hi
I am on Debian 11/amd64 with gr-gsm installed via apt.
kalibrate-rtl works as expected.
grgsm_scanner seems to be stuck in a loop. Or is this behavior expected?
At any rate, it produces no re…
-
Running grgsm_scanner on Ubuntu 18.04.04 LTS with Bus 001 Device 011: ID 0bda:2838 Realtek Semiconductor Corp. RTL2838 DVB-T
Packages were installed from apt-get.
When I run grgsm_scanner I am n…
-
Hi,
Im using ubuntu 20.04 and gnuradio 3.8.5, and i get the following error,
michael@ubuntu:~/Desktop/gr-iridium-maint-3.8$ iridium-extractor -D 4 examples/rtl-sdr.conf > output.bits
gr-osmosdr 0…
-
grgsm_scanner does not pick up any base stations. Below is the output when run with the debug flag. This is being run on an ubuntu docker container. The rtsdr device is found when running rtl_test. Ca…