-
Hi,
Is that possible to use a standard white/yellow (non rgb) led strip? Could it be possible just with some firmware update?
Thanks
-
Add RGB LED indicator for dryness.
- hard red blink: too long too wet.
- soft red blink: too dry
- yellow: water is needed soon
- green: everything good
-
Hello, I bought the following LED device with amazon https://www.amazon.fr/dp/B09P9N4FLC?psc=1&ref=ppx_yo2ov_dt_b_product_details
It works with LanterneLotus.
The device is found with ElkBledom bu…
-
Cannot get the RGB_LED.ino to work. it seems related to the FastLED library. (I tried different versions without success)
The project builds and uploads but the RGB LED does not work and when conne…
-
### Category
Hardware Compatibility
### Hardware
T-Echo
### Firmware Version
2.5.11.8e2a3e5
### Description
Pinout for Matrix LED on T-Echo is wrong(incomplete)
By reviewing the vendors scem…
-
Zephyr has a LED driver https://github.com/zephyrproject-rtos/zephyr/blob/main/drivers/led/led_gpio.c which is suitable for single LEDs. There is however (IMHO) no good way to handle RGB leds.
**De…
-
I have found a demo code for ESP32 and that works very well for indoor [P5 - 64x32 display(1/16 scan)](https://www.aliexpress.com/item/1005003236353714.html), but the same code does not work for outdo…
-
I'd like to be able to dim my projects RGB LED during the night.
Any interest in something like this? Or does it exist and I just missed it?
```cpp
// Move to json files:
#define PWM_R_CHANNEL…
-
Howdy, I'm from the rPi side where we have rpi-rgb-panels to drive up to 3 chains thanks to https://github.com/hzeller/rpi-rgb-led-matrix/
I got excited when I found https://kulplights.com/product/po…
-
Illumination power for RGB LEDs is not correct. By values lower than 50 jump the LED power to high. The problem is the 5 bit value range for each LED power.