-
### Network
MAINNET
### Token Symbol
RLB
### Token Name
Rollbit Coin
### Decimals
18
### Address
0x046eee2cc3188071c02bfc1745a6b17c656e3f3d
### Image URL
https://assets.coingecko.com/coins/…
-
After a JoinRequest and JoinAccept I transmit "hello world". I see that via an rtl sdr that the message has actually been send; however I don't see the uplink message frame in my Helium-IoT Console. N…
-
Hello Ropg,
Luckily I found your library. The Heltec libraries and instructions are terrible. I have a device on which I have installed the Lora example. After entering the TTN access data via the …
-
Hello
There is a question about RLB bit
1. ePMP spec (9ffec2d) says:
- RLB is RW if all pmpcfg[n].L = 0
- RLB is RW0C if any pmpcfg[n].L = 1
2. ePMP spec (ba757e7) says:
- remains 0 if…
-
Debug mode output
```
ESP-ROM:esp32s3-20210327
Build:Mar 27 2021
rst:0x8 (TG1WDT_SYS_RST),boot:0x8 (SPI_FAST_FLASH_BOOT)
Saved PC:0x403773ed
SPIWP:0xee
mode:DIO, clock div:1
load:0x3fce381…
-
Overall issue: When I tried to tighten the pieces in the "Motor Installation" section of the "Toolchanger Remote Elastic Lock Assembly" the heat-set brass inserts came out, and the piece was not held …
-
I confused with the coarse gravity solver，
“ tmp_A = 0.5 * I3x3 * (dt12 * dt12 * dt23 + dt23 * dt23 * dt12);
tmp_b = (pl2 - pl1) * dt23 - (pl3 - pl2) * dt12
+ (rl2 - rl1) * plb * dt2…
-
@hyye Hi , In the recommend paper ''Monocular Visual–Inertial State Estimation With Online Initialization and Camera–IMU Extrinsic Calibration'' in part V-B, I still confuse how to estimate the gravi…
-
Hello,
First of all thank you so much for this library to be available for everyone!
I use T-Deck plus (with SC126x radio) in combination with Helium-IoT Console and see that I receive a JoinReque…
-
**Describe the bug**
Running using the TockHal on the Apollo3 with a SX126x the first LoRa transmission works, but all subsequent transmits don't work, wither either error -5 (`RADIOLIB_ERR_TX_TIMEOU…