-
Hi everyone,
I searched for the flow rate parameter for my heat pump
Rotex HPSU 508
Many discussions but no real result
I found 2 other projects
And they seams to be able to read this valu…
-
When installing the adapter I get the following message:
"npm warn deprecated vm2@3.9.19: The library contains critical security issues and should not be used for production! The maintenance of the…
-
I tried this tutorial with my Rotex RHBX11CB9W and was not successful. Has anybody had success with this heat Pump or one out of the family "ROTEX HPSU Niedertemperatur Bi bloc"?
Log:
```
ERROR: Wr…
-
With my HPSU compact I got Rotex rocon-g1 gateway, to run it using Rotex Cloud. I don't like that much, so I tried to check what's inside and found Beagle Bone Black with CAN module.
https://www.he…
-
Hi raomin
First of all many thanks for your incredible work !
I was playing with my Rotex pump to connect a M5stick and to my homeassitant over Mosquito MQTT.
Apparently its fine because I can se…
-
Hi!
Where do I obtain the connector that connects to J13 inside the Rotex control unit?
Thanks!
I'd like to try to connect the Rotex HPSU Compact to OpenHAB, but first want to see if I get CAN wo…
-
After my server running mosquitto reboots for software updates the raspberry running pyHPSU isn't able to send commands (for instance rotex/command/heat_slope) anymore. Reading values keeps working. A…
-
# ESPAltherma Community post!
> ESPAltherma is used all over the world! well... mostly in Europe... mainly in Germany ;)
> Let's show each other what we did with ESPAltherma!
> This will be nice …
-
![image](https://user-images.githubusercontent.com/49793786/200056845-9d914f92-15a7-42a2-bca1-068e999ca30b.png)
`js
const hastebin = require("hastebin-gen");
if(interaction.customId === 'sure-yes…
-
I've seen that a time out error often means a bad cable. I've tried two different brand new jumper cables. I've also tried the older Rotex S protocol as someone in the installation thread with the sam…
zeman updated
9 months ago