-
I get this error:
```
pi@Homebridge:~ $ rpi-mqtt-monitor -d
Traceback (most recent call last):
File "/home/pi/rpi-mqtt-monitor/src/rpi-cpu2mqtt.py", line 780, in
gather_and_send_info()
…
-
Hi,
I'm trying to integrate the Android-RPi arpi-11 with the NXP PN7150 NFC module, which uses I2C from onboard GPIO pins 2 and 3, an interrupt pin using onboard GPIO 23, and an enable pin using onbo…
-
### Describe the bug
Linux 6.9 c64bb7e634c8aa4ae9ebb059d6a030e48ae78f89, 6.10 084962e99477691e0abe232731e3a24b14b05147 and 6.11 (based on local rebase of rpi-6.11.y branch on 6.11-rc4), RPi5 with X10…
-
Hello Everyone, while using libcamera i have encountered one issue: munmap_chunk(): invalid pointer
Kernel: Linux raspberrypi4-64 6.6.22-v8
[0:00:28.466082389] [406] INFO Camera camera_manager.…
-
**Is this the right place for my bug report?**
This issue seems to be firmware-related, as the clocking is done through it.
**Describe the bug**
Setting `arm_freq` beyond 3000 works fine, but `vc…
-
https://www.omglinux.com/raspberry-pi-os-update-may-2023/
Let see if "A substantial uplift, the newer kernel offers improved hardware support, new drivers, performance boosts, and better security."…
-
I use a ENC424J600 ethernet controller connected to a RPi Pico. The Pico also should generate the 25 MHz clock for the ENC424J600. In Zephyr v3.5.0 I used a PRE_KERNEL_1 SYS_INIT and the RPi Pico SDK…
-
By default PiGPIO uses the PCM clock (and thus the pins) to establish timing. Most audio devices use the PCM pins also. One can configure PiGPIO to use the PWM clock instead, however it appears the in…
-
### Describe the bug
We tested the IMX519 and found that metadata can be output normally on Pi4, but on Pi5, the cfe driver reported "Wrong metadata width/height/code". After a simple calculation, we…
-
### Describe the bug
As detailed by @lgeitner in the thread starting at https://github.com/raspberrypi/linux/pull/6144#issuecomment-2349489287, the MeteoPi application which requires UART access seem…