-
Is it possible to intergrate the codec with RPITX? Then you need only one usb soundcard.
For RX add a RTL-SDR device.
If this works then the pi zero can be used as secure qrp tranciever.
Cheers!
-
Do you have any plans to support RPITX?
https://github.com/F5OEO/librpitx
-
For some unknown reason,
After thirty tests
tesla charger not opening...
I am in Europe.
Did you know why?
I use this command
`sudo ./sendiq -s 250000 -f "433.92"e6 -t u8 -i tesla-2M.cu8`
-
Mit rpitx ist es möglich verschiedene Signale auf beliebigen Frequenzen direkt aus dem GPIO des Pi zu erzeugen.
Dieser Weg ist ohne zusätzliche Filterung der HF zwar nicht für einen Widerange-Sende…
do6uk updated
2 years ago
-
Have you ever used secplus with a Raspberry Pi using [rpitx](https://github.com/F5OEO/rpitx) for transmitting? I saw that there is a "[encode_ook](https://github.com/argilo/secplus/blob/master/secplus…
-
I've been wondering if it would be possible to interface this with another project (https://github.com/F5OEO/rpitx) to be able to use the on-board GPIO pin for local TX (given proper filtering, of cou…
-
Hi Dave!
Would it be possible to transmit the signals via LimeSDR-mini instead of RPITX?
I guess this would be considered a feature enhancement, new to github not sure to add the "enhancement" f…
-
Maybe we can use https://github.com/F5OEO/rpitx with raspberry
-
How can I resend the files that have been saved with the name cu8?
I wanted to do this through the rpitx program, but it only supports files with the .iq extension
I also used the cu8 to wave soluti…
-
RPi4b8gb - Installed librpix and SoapySDR_rpitx, rebooted per the instructions. Module is in correct directory.
Fired up GNU Radio Companion and cannot find any modules for rpitx.
At a command …