-
Would it be possible to get rssi for the wifis from the esp device?
-
I am using the latest .36 version for my 436HP and it seems that the rssi readings are not quite working, no matter the signal is strong or weak, it is always between -100 and -115, and even with my r…
-
TW X14 Ethos 1.6.0 RC1 and ISRM 3.0.0
TW R8 3.0.0
Telemetry screen shows two separate RSSI 2.4 GHZ / VFR RSSI and RSSI 2.4 Lora / VFR Lora
. I set the packet sent from SP40 to be the same as Renault TPMS. With the first three…
-
Here are some example of ground equipment. Seen at IAH and HOU:
{ "now" : 1731652770.3,
"messages" : 191150,
"aircraft" : [
{"hex":"a7cc6c","type":"adsr_icao","category":"C2","sil_type":…
-
### Question
What is the best way to keep the RSSI of gateway devices updated? I noticed that `esp_zb_zcl_cmd_read_attr_resp_message_t` contains RSSI information, but `esp_zb_zcl_report_attr_message_…
-
Hello,
With ETHOS on X20 / X20S / X10S / X12, tested on FCC or LBT, on ETHOS and OTX, the RSSI value is very low.
Even if both are closed ( 20cm ), the value is about 80 and very fluctuating.
…
-
Hi xianjun,
I'm confused about how the RSSI value is obtained, and why is the rssi_half_db_offset 150? If I want to use the 1G band, how should I determine these values?
```
if (freq_MHz