-
Hi Scott, I spoke with Dave (ColdTurkey LinuxCNC forum) about designing a dedicated rt1052 board. I would like to exchange ideas with you about this, I don't have your email that's why I'm writing to…
-
你好,我正在用rt1052这款芯片,有用过rt_thread的imx rt BSP,感觉几点不是很好
1、sdk驱动好像是比较老的
2、bsp里不是用MDK AC6的编译器;
3、没有sdram调试和flash下载这两种版本,像下面这种
![image](https://user-images.githubusercontent.com/58350098/159197005-e927037…
-
RT1052 RT1011 flash ----en25q16a
jlink keil 两个平台下,对flash擦除 ,编程 失败
-
Hey rbobey, Cold Turkey here.
Don't know how else to reach out off of the linuxcnc forum. Would like to talk with you regarding development of a dedicated motherboard for Remora using and RT1052 de…
-
I installed the PACK for RT1011 and then downloaded the HEX file using the Flash command, prompting me for the following information:
0000344:WARNING:cmsis_pack:Overlapping memory regions in file , d…
-
I bought EC500 and got version with i.MX RT1052 chip instead stm32.
Is it possible to add support for this version?
![1666191940460](https://user-images.githubusercontent.com/630493/196730266…
-
File `zephyr\soc\nxp\imxrt\mpu_regions.c` is included to sources unconditionally. So i can't use SRAM size more than 16M and less than 32M, because error in `zephyr\include\zephyr\arch\arm\cortex_m\a…
-
Hi:
I have try to support i.MX RT Series MCUs borad on PlatformIO, And Now The Seeeduino Arch MIX(RT1052) was been support, which using the Arduino framework. And ubsequent support for more board…
-
Hi.
Just received my NVEM controller today, but it is version V5. I can't find any version revision documents, so was wondering if you have tried to upload to a V5 controller yet....?
Cheers!
-
RT1052平台,AC6编译。程序过大,参考过https://github.com/zlgopen/awtk/blob/master/docs/how_to_optimize_for_512K_flash.md
没有明显改善。还有其他方法可以优化吗?
![size](https://user-images.githubusercontent.com/58360577/129711860-29a…