-
These receivers work well with for example gqrx. There is already support in librtlsdr, it was added more than three years ago (steve-m/librtlsdr@aefd8b7d58c4735b19110b5f54de289e8dd931f5). I have one …
Forst updated
3 months ago
-
```
GNSS-SDRLIB start!
error: failed to open rtlsdr device #0
error rcvinit
```
The issue is that my rtl sdr dongle shows up as #1 and there is no way to select it and thus sdrlib fails with the erro…
-
Hi,
I am noticing a significant difference in the amount of information that is being decoded. For a lot of aircraft the lat/lon is never populated whereas when using view1090 from dump1090_fa, I c…
-
Is there a work around for this? Is it a driver issue? I have DAB working on SDRangel which verifies the antenna and connections that I have etc, but I would prefer a dedicated , simpler interface li…
-
some newer rtlsdr dongles include an antenna bias voltage.
e.g. [here](http://www.rtl-sdr.com/rtl-sdr-blog-v-3-dongles-user-guide/)
This one is controlled by setting / clearing gpio 0 in librtlsd…
-
When I use `lmm_tcp` with [rtlamr](https://github.com/bemasher/rtlamr), it complains about an "Invalid magic number"
```bash
$ rtlamr -server=127.0.0.1:1234 -msgtype=all
15:08:43.332225 main.go…
-
The communication tether is a system that is based on RF communication
# System Constraints:
## ROV (Prototype):
The system must allow commands to be sent from shore to the ROV underwater
**Constrain…
-
It seems that when the application using `librtlsdr` exits without calling `rtlsdr_close`, then the dongle remains powered and hot even it is no longer used by any application. I can guess that maybe …
-
Hi,
I want to have 2 RTLSDR dongles on the same computer, always plugged into the same USB port. I am planning to assign a symlink "adsb" to the port for the RTL dongle that has an ADS-B antenna conn…
-
would like to have support to enable an external rtl_tcp server connection. for example I have a raspberry pi with an rtlsdr dongle on it, and want to remotely access it to scan frequencies. I really …