-
--------- Instructions --------
Please provide answers directly below each section.
--------- Instructions ---------
**ESPixelStick Firmware Version**
4.0-ci8301555430
**Hardware Version**
d…
-
I recently learned of the sACN sync packet. It is defined in E1-31-2018 sections 1.5, 4.2, 6.2.4, and 6.3.
I would be great if OLA was able to:
- Send sync packets as a part of the advanced API
…
-
There is no way to select sACN in output options. I can choose it but when saving changes artnet v4 is back. Tried almost every combination and problem presist. Artnet v4 and sACN also won't save.
…
-
When constructing the universe list for an sACN discovery message, the universe numbers are not translated to the correct byte order for the protocol. It looks like memcpy is used to load the PDU dat…
-
1) The readme should probably clarify that wLED supports sACN input (not output). From the outside looking in, the way the readme is worded makes it sound like it supports both in and out, which is n…
-
I have an application where it would be helpful to receive all priorities, rather than just the highest priority packets in the callback; because I want to be able to make some _alternate_ decisions a…
-
As the notes indicate, the interface bind on Linux doesn't work, particularly when we are dealing with multicast traffic. There are a range of reasons for this, but the socket implementation doesn't r…
-
v2.12 cashed spectacularly with a fatal error (Win 10) , but my fault as experimenting with my own sacn source code. I guess it was never designed as a development tool.
I was sending 10 universes 1-…
-
Hey, thanks so much for this project, it's super helpful to be able to bridge big lighting control systems with Hue.
Is there any chance you would consider adding support for sACN (E1.31) as an inp…
-
Hi,
I have a problem using this package. I'm building a macOS application using Swiftui and I'm not able to control my lights with this package. I have a Raspberry Pi set up with OLA.
To explain the…