-
# Intended use
I want to flash and erase my target (multiple times if needed) from a Raspberry Pi. I have to use a raw binary in this case, I cannot use the HEX format.
# Result
I was able to…
-
The following items are collected from the discussions of the Shadowfax Componentization WG:
### Component Discovery (follow up here: https://github.com/Open-CMSIS-Pack/Open-CMSIS-Pack/issues/23)
…
-
**Description**
Driver implementation assumes that only sam0 SOCs with `REV_SERCOM == 0x500` has error interrupt flags, whereas all supported sam0 SOCs except the samd21 actually supports them. This …
atnon updated
5 months ago
-
It seems that both soc.h files for samc20 and samc21 are missing the `ADC_SAM0_REFERENCE_ENABLE_PROTECTED` definition. As a consequence, the reference control register (REFCTRL), which is enable-prote…
-
It is required to have a device simulator.
An alternative to solve this situation is to create a **simulator.**
Do by software what I'm expecting from the hardware.…
-
### Environment
- OS and Version: OSX Venture 13.4 (but issue has been occurring for months)
- VS Code Version: 1.79.0
- C/C++ Extension Version: 1.15.4
### Bug Summary and Steps to Reproduce
…
-
I have just tried the stable and upstream versions for the SAMD51 on windows 10. No uploading or debugging working.
> Error: error during select: Unknown error
> .pioinit:12: Error in sourced co…