-
### Checklist
- [X] Checked the issue tracker for similar issues to ensure this is not a duplicate
- [X] Read the documentation to confirm the issue is not addressed there and your configuration is s…
-
Hi Mike,
Can it be also set to decode SBUS to 16 or 12 CPPM channels on one single output?
Thank you.
RMFPV updated
1 month ago
-
Hello, I see your project is quite successful but I am looking for something that apparently you have not yet achieved.
I explain to you:
- I have a rover or ardurover, my transmitters are a little …
-
### Discussed in https://github.com/ExpressLRS/ExpressLRS/discussions/2911
Originally posted by **Arielofek** September 3, 2024
Hello,
In my set up I have an ELRS receiver linked through SBU…
-
Hi.. Thanks for the code..
A question, do i need to get uninverted SBUS signal before connect it to Pyboard RX (UART)?
-
Hello
come or give a lua script so that you can replace the "servo channel changer" because frSky is no longer selling it.
I have some "SBUS decoders" in use and my SCC is defective
-
hello bro i connect and run all the code and diagram in proper way but there is no sbus signal receiver in inav please help i also connect bc547 transistor with 4.7k & 10k resistor please help me :)
-
Socket activated service connects:
```
[sbus_server_new_connection] (0x0200): Adding connection 0x11fe700.
...
[sbus_method_handler] (0x2000): Received D-Bus method org.freedesktop.DBus.Hello on /…
-
The RocketTile has servial connections with the context:
```
connectMasterPorts(domain, context)
connectSlavePorts(domain, context)
connectInterrupts(domain, context)
connectPRC…
-
Horus X10S Express, Ethos 1.5.11 Model in Master/SBUS for trainer. **Frsky** FWTM module does not get power, so cannot bind to slave radio.
Note that while the power issue was fixed in Edge, and …