-
- [x] missing ESD strips
- [x] missing DIOT power sequencing circuit
- [x] move 0R resistors closer to EEM connector to minimize stubs
- [x] get rid of ERC errors
- [x] missing Power_Stage schemat…
-
se/sche probleem vanwege verschillende bronnen?
![image](https://github.com/user-attachments/assets/898fd9d9-e25d-4fdd-bca3-0ccb709e6138)
-
- [x] change designators of all ICs to IC, not U
- [x] output of LMX2572RHA goes to SMA directly, not via TTL buffer
- [x] all clock chips must be supplied via 3.3V LDO, make 3.6V output from DC/DC…
-
Good afternoon!
Please add an electrical diagram for EBB SB2209_USB
Thanks!
-
Some character combinations just can't be detected by the algorithm.
Let's try the string 'sch', and assume I set the щ symbol to 'sch'.
s: is a letter, keep going
sc: not a letter, s was the let…
-
The current wording for `scheduler` concept in P2300R10 has the following concept:
```c++
template
concept scheduler =
derived_from &&
queryable &&
requires(Sch&& sch) {…
-
**What steps did you take and what happened:**
A scheduled backup is running.
Backup get stuck for 24 hours and fails with timeout error.
In backup description I see some pod volumes backup com…
-
Discussion #950 has found a few more issues. Attached are two schematics showing the issues.
1) The SB5100.lib diode Spice model doesn't work. See SB5100_recovery.sch. The model does work if it is…
-
Using the "-i" parameter I am not able to open files from the command line. Qucs-s opens fine, but with the default empty document (latest continuous build).
At first I though it might have something…
-
I updated all the files 9/26/24.
I'm having an issue getting three Voltage Controlled Resistor models in the link below to work in Qucs-S.
http://www.ecircuitcenter.com/Circuits/vc_resistor1/vc_r…