-
By now, we were able to narrow down the explanation of what causes DSW formation to decrease, when using thicker top cells.
Essentially, thicker top cells shift the Ekman transport near the Antarc…
-
Hello Toilmodular,
I have been eager to try out the DIY Frames, but am quite new to EasyEda, and wanted to do some revisions on the Schematic and PCB, is there a possibility of acquiring the schemat…
-
https://github.com/charlieh0tel/ee_stuff/blob/main/projects/rpi_sa8x8hat/rpi_sa8x8hat.kicad_sch
-
Create snippet and tutorial mdx doc
/bounty $65
-
**Describe the bug**
When I try to generate schematic, there's a warning prevent the schematic generation.
WARNING: Schematic generation is not implemented for KiCad version 8. @ [C:\Data\skidl\sk…
-
## Component list
- Motor.
- LM35 Temperature Sensor.
- HY-SRF05 Ultrasonic Sensor.
- 3 buttons.
- Red LED.
- USB to RS232 converter.
- Resistor 1K Ohm.
## Schematic
![PepsiCity_Scheme]…
-
I think the transistor is wired correctly in the Nano schematic and incorrectly on the other one.
I believe it should be an N-type transistor, wired to the middle pin with the 6.8K ohms resistor t…
-
Create a KiCad schematic with the necessary components.
Early BOM:
- MCU:
- RP2040 Pico W
- USB Port:
- USB C (P# TBD)
- FFC Connector:
- TBD
- BMC:
- TBD
- Battery:
- TBD
-
## Milestone Description:
- **Objective**: Provide all relevant details about the hardware configuration and connections.
- **Deliverables**:
- A brief overview of the hardware used (microco…
-
In a previous semester Ryan created a schematic for an IMU that was never implemented into our final design. This schematic was created in altium so it will need to be migrated, fab'd and tested.