-
Was brauchen wir für einen BrewHat 1.5? Oder gar 2.0?
Meine Vorschläge:
Min. 3 weitere I2C Anschlüsse (Display, Schrittmotor, reserve)
Status LED, die leuchten wenn Relais geschaltet werden
einige…
-
Hello there,
currently I am working on a Arduino project, with an arduino and a TMC5160 Stepper Driver.
The goal of this projcet is, to let a Nema 23 Stepper turn in both directions. Easy as that…
-
Moin, ich bin einfach mal so dreist und schreib hier auf Deutsch:
Erstmal schön, daß mein Bondtech-Adapter für Kakadus Druckkopf so gut ankommt :-) Daß ich bein Einbau meiner Kugellager für die Zah…
-
Any word of advice on interfacing trinamic drivers on board instead of the a4954 stepper drivers? This so stepper operation can be quieter.
-
# Feature Request
## Describe the Feature
I see two possible variants of this feature:
### Actuators have an option to allow their operation even while the machine is off
This option would intro…
-
As I understand it, a lot of newer (?) devices implement CiA402, which standardizes motion control over EtherCAT (and other CAN-family busses). Having a semi-generic driver that *doesnt'* need custom…
-
**Is your feature request related to a problem? Please describe.**
The current MQTT solution is just transmitting some manual selected parameters regularly to the broker.
**Describe the solution y…
-
Hi, im having issues with the stepper moving to wrong position when i run the example code, seems like it only moves wrong when going in reverse, to little. This is a awesome library if the position i…
-
I want to add the missing German translations for i8n as described in https://docs.wokwi.com/guides/translating.
```
{
"userMenu.signIn": "Anmelden",
"userMenu.signUp": "Registrieren",
"u…
maehw updated
2 years ago
-
Good day Thomas,
Thank you for sharing your 2-AxisLaserCutter with the whole world! I'm very interested in building it for making R/C model gliders too. I found your link to your 4-AxisFoamCutter o…