-
Is there a way to set custom wires?
I have
#define IICSDA 39
#define IICSCL 38
-
Create documentation for https://github.com/OSC/ondemand/pull/3952
-
I was wondering if it would be possible to add a feature to be able to export the weighted average of the four scales as a unique and new SCL file?
-
### Board Name
/dev/ttyACM0 (Arduino UNO R3)
### Steps
1. Set Up Your Environment
Ensure Python 3.x is installed (preferably 3.7+).
Install the latest versions of Adafruit Blinka and Adaf…
-
issue is threefold:
- [ ] remove the mask_scl_dilation as this is bad practice
- [ ] add a to_scl_dilation_mask following good practice
- [ ] incorporate this new method in the pre-mask workflow
-
I am a microtonal guitarist. I have a classical guitar that has a moveable frets fretboard design byed Tolgahan Cogulu.
https://tolgahancogulu.com/
Your app has proven to be most helpful. I can'…
-
Encountered by Wouter D.
This process graph will give scrambled results:
```python
connection = openeo.connect("openeo.dataspace.copernicus.eu").authenticate_oidc()
collection = connection.load_co…
-
when using the scala (e.g. scala mytuningfile.scl) message for the [sfz~] object, it returns an error:
`[sfz~] could not load scala file
`
This happens even when using the example in the help…
-
### Tested versions
4.3
### System information
Any
### Issue description
`rotate_toward()` is implemented by https://github.com/godotengine/godot/pull/80225, but set the incorrect targe…
-
Hi!
This library will not compile when the target board is an Arduino GIGA R1. Any thoughts on how to fix?
The outputData.ino example in this library, for instance, will not compile when the ta…