-
### Bug report
**Issue details**
I have a self-made SDP31 board with two SDP31 and each has its own I2C address (accomplished with the external resistor, the first sensor has the address 0x22, t…
aero4 updated
5 years ago
-
## Environment
- Development Kit: TTGO-T8-ESP32
- Kit version: v1.7
- Module or chip used: ESP32?
- IDF version: v5.0-dev-75-g1561fbd2c5 (latest master)
- Build System: idf.py
- Compiler ver…
-
Hello,
I am not a experienced Arduino User whe it comes to use external libraries.
### Your workbench
- Use IDE 1.8.19 on OSX
- Arduino Nano
Thank you for your help. Jakob
If I compile …
-
I've moved a working SDP31 sensor from Arduino to RP2040. It is not detected at bootup. Unfortunately no spare around. Did anybody get it to work?
[Monitor.zip](https://github.com/mstrens/oXs_on_RP20…
-
A pressure probe on SDP31 does not show positive airspeed, it shows exactly zero - using the known working (from M328) probe setup. But negative (compared to the M328 setup) airflow is shown correctly…
-
Hello,
our project is to make the datalogger for the suface water wave measurement. The datalogger was planned to be based on OLA (https://www.sparkfun.com/products/16832 ) with water level sensor …
-
There is a comment in your usage example
```python
# Execute custom command
raw_response = device.execute(ShdlcCommand(
id=0xD2, # The command ID as specified in the device docume…
-
-
### Bug report
When Airspeed (1 and 2) is logged (on SD), the raw pressure (column _DiffPress_) does not have a sign.
I used a SDP31 as airspeed sensor and this I2C sensor delivers a sign (two's c…
aero4 updated
5 years ago
-
### Bug report
When I connect a MS4525D to I2C 2 port of my Pixhawk 2 Cube I have to set ARSPD_BUS to 2 (auxillary).
But when using a SDP31 I have to set the ARSPD_BUS value to 0 (internal). Other…
aero4 updated
5 years ago