-
The NVMe disks in snap-01 are using 512 sectors instead of 4096 byte sectors. The sector size should likely be changed if boosts performance.
```
LBA Format 0 : Metadata Size: 0 bytes - Data Si…
-
The encodedecode tests do not work for for hard-sectored formats. This is because the sector pulses are not encoded into the .flux stream by the encoders. When writing a physical floppy disk, these …
-
## Introduction
In recent years, advances to process nodes in embedded hardware have made it necessary to support non-volatile technologies different from the classical on-chip NOR flash, which is …
-
Interactive Maps: Create interactive market maps that visualize the landscape of a particular industry or sector.
Charts and Graphs: Generate various charts and graphs to represent data such as fundi…
-
This is a format used for various Japanese computer images (including the PC-98).
https://fjkraan.home.xs4all.nl/comp/px4/vfloppy/d88Format.html
Unlike other PC-98 formats, this one supports varying…
-
Is it possible to support also old FM Floppy drives (such as 8 inch) and different sector sizes such as 256,128 or 1024 byte, such as listed in https://en.wikipedia.org/wiki/List_of_floppy_disk_format…
-
After reading [this thread](https://torlus.com/floppy/forum/viewtopic.php?f=19&t=1777) I got the understanding that HFEv3 should support hard-sectored formats, seems that allowing to control directly…
-
I have an Opus Discovery drive.
It has 2 formats:
single sided 40 tracks, 18 sectors, 256 sector size, index 0 (sectors 0-17)
double sided 80 tracks, 18 sectors, 256 sector size, index 0 (sectors 0…
-
### Describe problem solved by the proposed feature
Currently collision prevention in PX4 is broken.
### Describe your preferred solution
Move to vector field histogram (VFH) algorithm.
Do…
-
Would be nice to have the TI-99 supported disk formats added to be native so we don't have to convert to HFE. We would then be able to verify sectors.
40 Track:
TI-99 / Geneve (Single Sided / Sin…