-
### Feedback
I successfully paired and integrated the [Sensirion SHT31 Gadget](https://developer.sensirion.com/archive/platforms/sht31-smart-gadget-development-kit/). However, the (older model) SHT31…
-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have updat…
-
I have been using SGP41 sensors in combination with SHT41 for two or three years now. It works really well with a raspberry pi zero 2 with the algorithm provided by Sensirion. However, the self-heatin…
-
Hi
Error while compiling exampleUsage.ino
```
C:\Users\stiam\AppData\Local\Temp\.arduinoIDE-unsaved2024726-13276-1kakfg3.42te\exampleUsage\exampleUsage.ino: In function 'void setup()':
C:\Users\…
-
The code compiles fine but when i upload it to my Heltec WiFi LoRa V3 board the Serial Monitor shows the following error before doing a reboot:
```
joining...
Guru Meditation Error: Core 1 pa…
-
Finally I got my Testdevice running with a SGP41 sensor.
But I am curious about the computed values. What does a calculated NOx value mean? Is there any documentation about the output value and the…
-
Hello,
Trying to read SCD41 using Sensirion I2C SCD4x library, but compilations give below error:
.
.
.
C:\Users\DELL\Documents\Arduino\libraries\Sensirion_I2C_SCD4x\src/SensirionI2CScd4x.h:399…
-
For the special 3-byte I2C communication, and for the CRC calculation, sensirion has published a crate. See here: https://crates.io/crates/sensirion-i2c
Maybe you find it useful.
-
I wonder if it's possible to swap Sensirion SEN54 to SEN55. The question is, if Ikea's firmware support additional data from the sensor. Protocol is basically the same.
-
**Describe the problem you have/What new integration you would like**
Support for the Sensirion SHT1x temperature/humidity sensors
**Please describe your use case for this integration and alte…