-
### The problem
Tuya integration is not accurately discerning sensor state. Please see demonstration.
https://youtu.be/UbQEa_1kQio?si=XerIEcIl_AsG57Nc
**Issue Summary:**
When the state of a sens…
-
### The problem
The solarlog integration throws errors and doesn't update the sensor in random intervalls.
### What version of Home Assistant Core has the issue?
core-2024.9.1
### What was the l…
-
### The problem
I have a Somfy Smoke alarm (https://shop.somfy.co.uk/smoke-alarm-io/). In my Tahoma app, I can test the sensor alarm. Unfortunetly, in the Overkiz integration, I haven't (see screensh…
-
### The problem
The Whirlpool integration's controls work fine, but it does not include the sensor device definitions for long-term statics collection.
I have Whirlpool Models: SPIW309A2WF & SPIW312…
-
### The problem
Since last esphome update my 8 LD2410 Sensor became with unknown state on all sensor LD2410 Sensor.
I was able to get 3 working, by upload several times de yaml code, but the others …
-
I am running Home Assistant 2024.8.1 and have installed the latest version of the Plant Monitor integration.
I have Ecokwit soil moisture sensors setup under the ecowitt integration. The sensor entit…
-
Hi
I started with a clean installation. I put on my HA source:
remote_homeassistant:
instances:
Then I did a YAML installation on my destination HA with:
remote_homeassistant:
instances:…
-
### Checklist
- [X] I have filled out the template to the best of my ability.
- [X] I have understood that this integration is only about battery management systems with Bluetooth Low Energy support.…
-
### The problem
Just purchased some Yolink LoRa door sensors and a hub and installed the HA Yolink integration. Everything went well and all the sensors were detected, but not of them are updated in…
-
### The problem
It seems the heat pumps are also reporting which SG-mode they are in. This is quite helpful if you are either having a load-depending stop signal from your electrical power provider o…