-
Hello,
I have been working on a project that involves two OLED displays, both of the SH1106 type. One display has the I2C address 0x3C, and the other has 0x3D and both are connected to the same I2C l…
-
Частичное обновление на дисплеях SH1106 работает некорректно. Проверил на Arduino Nano и на NodeMCU 1.0.
При попытке частичного обновления, фрагмент появляется в непредсказуемых местах и растянут по …
-
- Version of embedded-graphics in use (if applicable): [0.8.0]
- Target: real hardware
- If using real hardware: sh1106 based OLED & ESP32 WROOM
Please link to the driver on [SH1106](https://gith…
-
hello, help me please. I seem to have set everything up, but the screen shows no signs of life.
**I use:**
stm32f103c8t6
sh1106
STM32CubeIDE
[sh1106.zip](https://github.com/desertkun/SH1106…
-
D:\Downloads\Nugget-BLE-Spam-main (1)\Nugget-BLE-Spam-main\nugget-apple-juice\Screen.cpp:3:10: fatal error: SH1106.h: No such file or directory
3 | #include "SH1106.h"
| ^~~~~~~~~…
-
This chip has a slightly larger memory buffer per row than the SH1107 (132 vs 128), so currently the display is shifted and also draws a white line on the right-hand side.
**NOTE** This is running …
-
Could be possible support OLED display sh1106 driver?
-
trying to compile with SH1106 OLED enabled I keep getting this error:
> Arduino: 1.8.3 (Windows Store 1.8.6.0) (Windows 10), Board: "Arduino Nano, ATmega328"
> ----------------snip--------------…
guelz updated
7 years ago
-
I was wondering if I could have help getting a version of this library that is compatible with the SH1106 driver which is 132 pixels wide, and causes the display to be cut off on the left side.
-
Hello,
I just got the kit from https://shop.blinkyparts.com/en/OpenDTU-Your-evaluation-for-your-balcony-solar-system/blink237542 (nrf module). The kit is wonderful and easy to assemble (thanks for …