-
### Feedback
It would be _**very**_ nice to add a note to the Bosch SHC integration information, that Bosch Cameras are **_not_** integrated. They use an island-solution that even with the Bosch Apps…
-
Hi all,
I am trying to compute the Spin Hall Conductivity (SHC) in Co2MnGa, a ferromagnetic system. I've created a Wannier model using VASP and wannier90, and when I compare the DFT bands with the …
-
SH-Deployer fails to start:
```
RUNNING HANDLER [splunk_common : Restart the splunkd service - Via CLI] ********
changed: [localhost]
Tuesday 30 April 2024 12:18:29 +0000 (0:01:00.274) 0:02…
-
### Request Type
Bug
### Work Environment
RedHat 8.10
TheHive 2.3.2
### Problem Description
Hello, following advices from https://github.com/LetMeR00t/TA-thehive-cortex/issues/67 to sync co…
-
### The problem
The integrated 230V room thermostats from Bosch all incorrectly display a (low) battery level. These do not have a battery because they are connected to the grid.
"Raumthermostat 2…
-
I have trigger the service call smokedetector_check with the entity_id: binary_sensor.flur_battery of the smoke detector.
It doesn´t work yet. In The code The device ist the binary_sensor or I do som…
-
is there a fastener designated for the carbon filter latch ? I don't see anything in the BoM.
It could be a press fit pin, or maybe a m2 screw if there was a recess for a SHCS in the corresponding…
-
Hi Charles,
I was able to test new alignment and I'm not sure it works as expected.
I tested it by PC alignment (#:AA and 2 sync commands by plate solving) and I got 0 as alignment error value by…
-
Hi neurobin,
I got some troubles:
> cat test.csh
#!/bin/csh -f
set tmp='"apple"'
echo $tmp
set tmp='"banana"'
echo $tmp
>./test.csh
"apple"
"banana"
>sh -f test.csh
>ls -a
. .. test.c…
-
It is possible to reboot the SHC (SmartHomeController) via the API. That should also be possible via OpenHAB for example to realize a rule that reboots the device at regular intervals or as a workarou…