-
Here I am again. Could you create SVG's of the shelly cloud logo, Shelly1 and Shelly2 device (I might request more later on).
Shelly Cloud: https://shelly.cloud/wp-content/uploads/2017/05/shelly_lo…
-
I have been having problems converting two shelly2 devices from tasmota v9.4.0 to stock Shelly firmware.
I successfully converted a few shelly1 devices but the shelly2 devices are not happy.
I hav…
-
### Summary
Using a `Shelly2.5` with `Tasmota 13.2.0` and not getting some energy stats.
### Hypothesis
Assuming not working because it's a list of stats in the StatusSNS object; because the She…
-
Hi
I would like to add a Shelly Plus 2PM (shelly1) which is connected through another shelly (shelly2) by the range extender feature.
shelly1 does not have an own external IP address but is acce…
-
Hello I have the following issue:
* device: shelly2.5
* installed firmware: tasmota 11.1.0
When trying to upload this minimal firmware i get the error:
```
Upload Failed
Not enough space…
-
I use Shelly2.5 with official integration for HA.
A physical switch is connected to the Shelly2.5 input0.
The shelly is configured in detached mode. Which means that the input is not directly con…
-
**What new integration would you wish to have?**
MCP39F501, the energy monitoring chip present on the Shelly 2 (https://shelly.cloud/shelly2/)
Datasheet: https://www.microchip.com/wwwproducts/en…
-
Steuerung von Rolläden über WLAN mit dem ESP8266
-
Hi Alex,
I am using Shelly2.5 for roller shutter. More precisely it is an external blind (raffstore).
For the control of the roller I would expect that when I tap on the tile it starts to `close…
-
iOS 13 Carplay allows you to easily access your garage-door when arriving and leaving your house. Seems Homekit has added a feature to define garage-door openers and there are a number of plugins that…