-
Hi, is there any pin that I can use for third thermistor sensor for heated chamber?
I tried Z stop and PS-on. No luck.
-
Trying to set up the SFS V2.0 on an SKR Mini E3 V3 and not sure of the wiring. The manual has the wiring from the SFS going to 2 pins on the E0DET and to 2 pins on the E1DET plugs and the SKR Mini E3 …
-
I want independent control of a fifth stepper driver for G34 bed leveling in Marlin by using the EXP-MOT v1 module. My SKR Mini E3 v3 is connected to a TFT35 E3 v3, and thus does not have an open EXP …
-
Bonjour,
J'ai installer sont mon Ender 3 V2 une skr mini e3 v3 avec klipper.
J'ai bien flasher le firmware comme indiquer sur le github.
https://github.com/bigtreetech/BIGTREETECH-SKR-mini-E3/tre…
-
Hello,
I have an Ender 3 with an SKR Mini E3 V3, and I just bought the Micro Probe V2. I tried both firmware files from the firmware tab, but neither worked.
First, I tried the normal wiring wit…
-
I'm attempting to follow the instructions of the MicroProbe V2 manual, which is on this GitHub, and I've been running into error after error.
>note: this is the location of the previous definition
…
-
Hello
I'm trying to upload the bootloader on a SKR MINI E3 V3 i download the file and plug the bord via ST-Link and try to upload but when i do Program and Verify it says Canot disable Read Out Pr…
-
This is a catch-all for all "me too" configuration requests. If you can submit partly or fully working configs for printers we don't yet support, please do, as we rely on owners of machines to test an…
-
Can you add the Big tree tech "SKR MINI E3 V3.0' mainboard trays?
-
Hello,
Does this plugin support connecting the sensor to the dedicated port on the [skr-mini-e3](https://www.bigtree-tech.com/products/bigtreetech-skr-mini-e3-v2-0-32-bit-control-board-integrated-t…
jacix updated
3 years ago