-
While using SkySafari with the TeensyDSC, it has been known to happen that SkySafari sometimes stops updating it's screen. Currently, it's unknown if this is a SkySafari issue, WiFi communication iss…
-
Discovered a new bug in the Nexus DSC.
If you set alignment in setup to '1 star', beware......
If you initial align via the Nexus DSC catalogue and keypad, all is OK and subsequently you can do lo…
-
Today it is possible to use the INDI drivers reachable via Indiserver for driving equatorial mounts from Stellarium.
Would it be possible to use the DSC driver from INDI to point accurately Push to d…
-
**Is your feature request related to a problem? Please describe.**
The list of supported devices for the Telescope Control plugin does not include Basic Encoders such as the BBox / intelliscope / "Ba…
-
Using one of the switches exposed via the 2.5mm port, pretend the scope is fixed in stone and can not move. This will provide SkySafari a very stable value to read for 2-star alignment.
-
I made your project with a wemos d1 mini. Compared to the original scheme I only removed the resistance and the shot on EN pin.
Connection with SkyPortal or SkySafari works well but the up / down /…
-
From Keith:
I realise that the delta on the display, is 'solved' versus 'Nexus readout’. This is partly due to a hangover from previous days when I didn't have access to the goto target coordinates…
-
In our current implementation this function in SkySafari or other LX200 control apps acts like a go-to command and starts a push-to cycle on the PiFinder.
For some use cases where the telescope poi…
-
_Original report by Pierluigi Panunzi:_ https://bugs.launchpad.net/stellarium/+bug/1766855
Hi!
This is not a bug, but a request of new implementation.
When Stellarium starts, the visualization fo…
-
Setting a UTC Time/Offset resulting in a Local Time falling on December 29, 30, and 31 for any year will yield an INDI Control Panel error. This error results in the mount's local time not being chan…