-
### Link
https://www.ebay.co.uk/itm/355700417511
### Database entry
{"id":21,"type":"EndDevice","ieeeAddr":"0xa4c13869455a3642","nwkAddr":26812,"manufId":4417,"manufName":"_TZE204_uab532m0","powerS…
-
-
### The problem
I have a Fronius Gen 24 with two Smart Meters and a BYD Battery. The two Smart Meters were working fine until I added the BYD Battery recently. One of the two Smart Meters suddenly di…
-
hello, I have the same smart stuff dongle as you and I am trying to use it with Tasmota, when I add the berry scrips as you it gives me an error, are you able to help me make my p1 meter to work
!…
-
1. Firmware PoC en Zephyr i Nordic semiconductors.
2. Driver sensor Analog Devic Time of flight
3. Nordic guardar en la flash (1 Semana) Settings
4. Por bluetooth al nordic cambiarle la configuracion…
-
-
### The problem
Hallo,
The TUYA integration does not deliver all the data. I want to use "cur_power": 7198 to use as indicator if borehole pump is running
Any advice on using templates to e…
-
Hi Dev team,
is there a way to improve the startup time of this addin.
According to the Integration startup time the integration needs 10 time more then the next integration item which is Zigbee i…
-
### Link
https://es.aliexpress.com/item/1005006395402636.html?gatewayAdapt=glo2esp
### Database entry
{"id":66,"type":"EndDevice","ieeeAddr":"0x0ceff6fffe4bdda2","nwkAddr":39698,"manufId":409…
-
I managed to start your service. Thanks so much for this!
Unfortunatly i have no smart meter connected to my kostal. So when the service reads out the "meter" from the Plenticore Modbus Registers, …