-
I really like the leightwight bifrost.
Its lacking support for hue sensors switches. With these, its possible to create scenes via hue app.
Thank you for your work!
-
### Check Existing Issues
- [X] I have checked existing issues, and this issue is not a duplicate
### Description
In smart mode, I just toggle a switch of only switch, the icons just been hide imme…
-
@Mariano-Github Hi, was wondering if you have any thing that does the same as the following for 1 to 4 gangs zigbee light switches?
https://moeshouse.com/blogs/news/how-to-get-multi-control-associa…
-
When switching the thermostat from 'off' to 'heat' the switch isn't immediately being turned on despite a high enough PID output.
According to the log the cycle time is too short, but with an o…
-
Hello,
Is it possible to have more smart switches (push buttons and relays) controlled by same ESP32?
For saving pins, I'm thinking not to use the RGB leds for each switch and to have just a regu…
-
### The problem
I recently added 6 brand new Tapo P100 smart switches to my home network. I have managed to add 3 to the TPLINK integration but 3 refuse to pass the authentication. I have tried mul…
-
### The problem
Dear all, I noticed that since 09/30 my switches stopped working only within the HA.
At first I thought the project would be expired, but it is still valid (I took advantage and re…
-
## Description
Currently, we have applied a workaround for IoT (and other trainings) which require wired devices on the same broadcast domain as wireless devices by dedicating 8 ports on each of th…
-
### Page URL
https://docs.netapp.com/us-en/ontap-metrocluster/maintain/task_upgrade_to_new_brocade_switches.html
### Page title
Upgrading to new Brocade FC switches
### Summary
Why do we wait unt…
-
I have a mixed z-wave and wifi Leviton environment, where my remote buildings where I have wifi coverage are using the Leviton Decora Wifi smart switches and dimmers, and the main house is using z-wav…