-
I have a Pi Zero W reading registers from an AdaFruit MAX17042 battery fuel gauge [https://www.adafruit.com/product/5580](url) using the I2C bus with a single cell LiPo battery and a 68 Ohm resistor …
-
Can you explicit how to find the i2c address ?
I installed correctly HassOS I2C Configurator
last lines are
```
/dev/i2c-1
/dev/i2c-0 /dev/i2c-1 /dev/i2c-10 /dev/i2c-22
Found i2c access! Nothin…
-
Hardware: RPi 4B 4GB
OS: Bullseye
DC: v5.0.dev3
MPU: mpu9250 on Robo HAT MM1 at hex address 0x69
IMU configuration in myconfig.py:
```
# IMU for imu model
HAVE_IMU = True
IMU_SENSOR = 'mpu92…
TCIII updated
2 months ago
-
We use smbus2 in the Mission Pinball Framework (https://github.com/missionpinball/mpf/). However, MPF is an asyncio application and most operations will block for a while. It certainly works because I…
-
## Describe the bug
I'm using a Jetson nano with jetpack 4.6.2. I used the normal command `sudo pip3 install -U jetson-stats` to install on two other Jetson nanos and they work fine, but for one of…
-
Should be a smbus2-like API: https://github.com/kplindegaard/smbus2
-
I can't seem to get this operational with a Jetson Nano. Tried both Bus 0 and 1 (i.e. pins 3 & 5 or 27 & 28), I've tried pull up resistors between 1kΩ-10kΩ and I still get either
```shell
...
Fil…
-
Dear @kplindegaard,
Thank you for all your effort and your very nice smbus2 interface for python, which will hopefully help me with my problem to interface a 3d magnetic field amr sensor. Unfortuna…
sdrck updated
4 years ago
-
When running a ```pip3 install -e .``` in the repos directory to install the Slush package not all of the dependencies are installed (specifically smbus2) requiring the user to install it separately. …
-
Hi,
I'm using Nvidia Jetbot with JetPack 4.6. I'm using the standard Spark Fun setup and double checked that the wiring are right according to SparkFun assembly guide [here](https://learn.sparkfun.co…