-
Hi there!
For those interested in building a KLOR keyboard you may check [my fork](https://github.com/Lefuneste83/KLOR) of the design including :
- Full height switch version (fully qualified) an…
-
Hi,
you wrote that in v0.5 you replaced the glued BF350 with footprints for SMD resistors. Which type of SMD resistors do I need to make it work with the HX711. Just default 330 ohm SMD?
-
Von Google Code: https://code.google.com/p/part-db/issues/detail?id=36
Es wäre hilfreich, wenn man mit wenigen Klicks sehr viele neue Footprints auf einmal anlegen könnte. Jeden Footprint einzeln zu …
-
I was looking at resistors library and I cannot find exactly what I need. I also suck at making own footprints. :/
It is about 4 terminal SMD shunt resistors (for measuring current).
Example:
…
-
@poeschlr @jkriege2 @Ratfink @Misca1234
[KLC says we should only have 250 footprints or symbols in a lib](http://kicad-pcb.org/libraries/klc/G1.2/). Some of our footprint libs are exceeding this num…
-
Hello Toilmodular,
I have been eager to try out the DIY Frames, but am quite new to EasyEda, and wanted to do some revisions on the Schematic and PCB, is there a possibility of acquiring the schemat…
-
For details refer the original issue over at the old repo:
https://github.com/KiCad/Crystals.pretty/issues/23
---
It seems most of the footprints are scripted. So fixing this inside the scripts…
-
I've got the following messages:
Component Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Horizontal has not footprint.
Component LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder has not foo…
-
http://kicad-pcb.org/libraries/klc/F3.3/ specifies something different than the existing footprints names for both our THT and SMD caps.
THT:
THT caps don't have height in the footprint name even …
-
the plugin in general work great, better than the native export
few issues i noticed
- [ ] for smd footprints with tht pads in the smd pads i get joints, [1]
- [ ] missing pads for smd footprin…