-
The energy_today_generation sensor is getting occasional numbers (once or twice a day) which are less than the previous one. This causes issues with the Energy dashboard and probably other areas. Is…
-
**Is your feature request related to a problem? Please describe.**
I found a integration for Solarman lsw3 wifi dongle that works with Sofar inverter and I am looking for ways to make it work with pr…
-
While car charging, predbat appears to put a Sofar inverter to charge mode. This means battery is fully charging irrespective of tomorrow's forecast solar, buying at 8.5p plus losses, to sell at 8p s…
-
Hi folks, in the last few days I've added a wallbox for charging electric cars, which communicates with my inverter in RS485. I tried to connect my Sofar2mqtt together with the walbox, but being two M…
-
Should this be the other way around?
https://github.com/cmcgerty/Sofar2mqtt/blob/4f061801fb2c7e3699ccd78cc1b99fed54aead0d/Sofar2mqtt/Sofar2mqtt.ino#L459-L462
-
Hi there
When I take the code from the project, I get the following errors when compiling it - although it does compile, but can this reported errors be fixed ?
C:\Users\corma\Downloads\Sofar2mq…
-
Hello,
After charging the battery using Sofar2mqtt (It works fine), I tried to stop charging in Home Assistant by putting
Sofar2mqtt/set/auto like this :
` as a proxy for the inverter running state.
For example:
- ID16 Input current is not balanced = inverter is charging
…
-
Hi,
I have an inverter Sofar HYD 6000 EP. This model is quiet new and I have a logger 23xxxxx with the firmware LSW3_15_270A_1.32.
I tried the set up but the inverter is not connected and I have u…