-
I updated like 8 or 9 Xiamo LYWSD03MMC to Zigbee FW Z03MMC_v0123.bin and they work flawless, but one somehow has issues.
I did do a reset, first it showed Farenheit, another reset with the battery in…
-
Dear Team,
Today while trying to work on the GPAD for the HardwareX paper, I released that I had a major misconception: you can't program it through the serial port with another microcontroller wit…
-
**Describe the problem you have/What new integration you would like**
The [Gecko IN.YE](https://www.geckodocs.com/yseries) Spa main controller has the option to be controlled via an external [I…
-
Hi all!
I’ll describe it briefly... stm32f401re6 was installed, flashed with st-link, first flashed - stalkb-bootloader.hex then stm32f401-usb-keyboard-amiga.hex. everything went through the check wi…
-
Recently I got an 3.5" hanshow nebular pricetag. Orignally I wanted to reflash it with alternative firmware. But after some cuts into the case I found out that they changed the layout - the soldering …
-
I managed to solder a set together, this looks beautiful! Thank you for sharing this.
I'm now progressing to firmware... two questions:
1) any specific Changes I need to make for the firmware to …
-
I have an Arduino UNO R3. In the guide it says, that Leonardo boards don't work. What about UNO?
-
[They exist.](https://eteexr.com/products/new-eteetrackers) They work.
From what I can see, however, they only have an USB-C connection.
This is because etee's controllers also work without trackers…
-
### Description
It's seems quite a few smart devices are moving away from ESP controllers and use BK7231 chips instead. Would there likely be espurna style firmware in the future?
### Solution
The …
-
I'm still working on my Formula GP and it's adapter. Soldering the adapter is a bit postponed but it's coming. However it does not have a dpad.
So if I want to have dpad on the Xbox I might want to…