-
### Guidelines
- [X] I checked for duplicate suggestions
- [X] My suggestion intends to add or improve something
### Version
Development (Staging)
### Topic
A design problem (e.g. clunky UX, a ba…
-
# Feature Request
## Describe the Feature
Allow Order of operation change with DragFeeders and PushPullFeeders.
Im running OpenPnP on a Charmhigh CHM-T36VA. The tape advance is done by a solenoid a…
-
copied from https://github.com/AllYarnsAreBeautiful/ayab-desktop/issues/256
> When you cancel or finish and restart a pattern, there's often a clunking sound from the solenoids as it resets. The or…
-
In GitLab by @mkovari on Dec 3, 2021, 19:22
When no central solenoid is included all of the central solenoid outputs are still present, and some are non-zero!
```
(step22010303) Central Solenoi…
-
Paused a session while i was on the 6th trial out of 8, started an all new, but now code only presents trials 6,7 and 8. I completed the three trials, code says it is finished, but it still presenting…
-
After looking over the design, I was slightly confused by the pneumatic plumbing of the device, hopefully I could make a suggestion to simplify the setup of the air path.
You should be able to use …
-
[This is also posted in the Stars Filter Theory discussion]
What is the difference between a closed solenoid valve and an open solenoid valve?
What do they each do?
We are assuming the valves h…
-
The autonomous drone on NaviGator is required to pick up a tin can, move with it gripped, and drop it at another location. To do this, we need to create a mechanism capable of holding the tin can. Goo…
-
In GitLab by @mkovari on Aug 15, 2014, 14:00
There is an odd fudge when calculating the Central Solenoid currents.
`cohbof = min(fcohbof, 1.0D0)`
`fcohbof = max(fcohbof, -1.0D0)`
where
`fc…
-
테스트 가능한 장치(모듈)별 목록(List)과 예제 코드(Sample code)를 업로드합니다.
_각 샘플코드는 Chat GPT를 통해서 작성되었습니다._
### **개발 H/W & Parts List**
**Distance/TOF detector**
D01. TOF 200C Laser ranging sensor module, VL53L0X,…