AllYarnsAreBeautiful ayab-firmware issues

AllYarnsAreBeautiful / ayab-firmware

Contains the Arduino Firmware for the AYAB Shield

GNU General Public License v3.0

23 stars 19 forks source link

issues

Newest

Newest Most commented Recently updated Oldest Least commented Least recently updated

Upgrade all actions to remove warnings

#213 jonathanperret closed 1 week ago
1
AyabAsync v1.1.1

#212 jpcornil-git closed 2 weeks ago
1
Add proper support for PCF8574 port expander

#211 dl1com opened 2 weeks ago
2
Update upload-artifact dependency to v4

#210 dl1com closed 1 week ago
0
AyabAsync v1.1.3

#209 jpcornil-git opened 3 weeks ago
2
Only init on left turn mark if headed to the right

#208 clholgat closed 3 weeks ago
1
[270] Fix alignment issues

#207 clholgat closed 4 weeks ago
8
introduce test_e2e

#206 jonathanperret opened 1 month ago
1
Fix carriage detection on the right

#205 jonathanperret opened 1 month ago
1
Needle selection is wrong on KH270, Beta builds.

#204 Adrienne200 closed 4 weeks ago
7
Fix clunking sound from solenoids (#15)

#203 jonathanperret opened 1 month ago
3
Add info about branching concept

#202 dl1com closed 2 months ago
3
Tester: don't send empty message for empty version suffix, and add `-` in front of version suffix

#201 jonathanperret closed 2 months ago
1
Wait for both selectors to clear the limit for end of row detection

#200 jonathanperret opened 3 months ago
1
tester: enable beeper so that beep command does something

#199 jonathanperret closed 3 months ago
1
Beep command in test mode does not beep

#198 jonathanperret closed 3 months ago
0
End-of-row is (still) sometimes detected too early

#197 jonathanperret opened 3 months ago
0
Systemic changes to support garter carriage on the full bed

#196 clholgat closed 2 months ago
6
Include full firmware version in test mode welcome message

#195 jonathanperret closed 3 months ago
2
Remove 2-second delay when starting to knit

#194 jonathanperret closed 3 months ago
3
com: shrink send/receive buffers from 256 to 64 bytes

#193 jonathanperret closed 4 months ago
4
Remove non-const char overload of Com::sendMsg

#192 jonathanperret closed 4 months ago
1
Allocate class instances statically

#191 jonathanperret closed 4 months ago
1
Memory gets corrupted when processing serial messages

#190 jonathanperret closed 4 months ago
0
Add optional stack overflow checking

#189 jonathanperret closed 4 months ago
3
Ignore empty SLIP packets

#188 jonathanperret closed 4 months ago
1
Change from `Knit` to `Init` state when Quit command is received

#187 t0mpr1c3 opened 8 months ago
2
Add support for G-carriage detection

#186 jpcornil-git closed 9 months ago
3
Is the long delay at the beginning of the first row still needed?

#185 Adrienne200 closed 3 months ago
3
930 bug fixes for garter carriage alignment and lace carriage start selection

#184 clholgat closed 9 months ago
0
EOL refactor prototype

#183 VIPQualityPost opened 9 months ago
3
Add ayab-esp32 Build environment

#182 dl1com closed 9 months ago
11
add support for arduino R4

#181 VIPQualityPost closed 9 months ago
3
KH930: garter carriage starting from the left; pattern is displaced by 24 needles.

#180 Adrienne200 closed 7 months ago
1
KH910 garter carriage mispatterns on a 190-stitch wide pattern.

#179 Adrienne200 closed 2 months ago
12
KH930 L-carriage, left-right passes don't select the last needles on the left

#178 Adrienne200 closed 8 months ago
0
KH930: pattern with 200 stitches, needle L100 is always selected.

#177 Adrienne200 closed 8 months ago
3
KH930: Lace carriage not recognized from the right

#176 Adrienne200 opened 1 year ago
2
KH930: pattern displaced using the K-carriage starting from the right

#175 Adrienne200 opened 1 year ago
5
Move to state Init after finishing Knit operation

#174 t0mpr1c3 closed 11 months ago
0
After finishing the Knit operation, the FSM should enter state Init not state Ready

#173 t0mpr1c3 closed 2 months ago
2
Fix reqTest bug

#172 t0mpr1c3 closed 11 months ago
0
reqTest bug

#171 t0mpr1c3 closed 1 month ago
1
Make row buffer two rows deep

#170 t0mpr1c3 opened 1 year ago
0
Fix cancel knit, move first run from `OpKnit::knit()` to `OpKnit::begin()`

#169 t0mpr1c3 opened 1 year ago
0
Remove `encodePosition()`

#168 t0mpr1c3 opened 1 year ago
0
Get rid of `encodePosition()`

#167 t0mpr1c3 opened 1 year ago
0
formalize states of `Knit` operation

#166 t0mpr1c3 opened 1 year ago
1
Com

#165 t0mpr1c3 closed 1 year ago
0
Wrong-length messages not detected at compile time

#164 t0mpr1c3 closed 1 year ago
0