-
Hi,
i am very new to this and i have to admit that i only know half of what i am doing here. But basically i wanted to integrate my Sonoff SC with Home Assistant. I did not want to use any hardware…
toco1 updated
5 years ago
-
Hi,
in my sonoff basic R2 I don't have GPIO14. Close to the 4 holes (3v3, gnd, rx and tx) I have a pad marked IO2, without the hole. And if I drill the hole, I risk to break the upper side tracks...
-
### Is there already an existing issue for this?
- [X] I have searched the existing issues and there is none for my device
### Product name
SONOFF SNZB-03P Motion Sensor [Link](https://sonoff.tech/…
-
Hello, I have a problem that keeps me busy for some days. I have several Homie devices running at version 2.0. Thank you for creating Homie!
I try to setup a Sonoff Basic with Homie, flashing works…
-
Hi,
I have a 'spare' sonoff R1 and I am trying to flash cforth onto it.
I have read the notes
```
Sonoff S20 - WiFi mains switch with ESP8266 inside
FM=dout FS=8m make download …
-
**Name of Board**
Sonoff BASICR2 DIY Smart Switch
**Board Architecture (i.e: SAMD51, ESP32-S2, ESP32, ...)**
ESP8266
**Hardware URL**
https://sonoff.tech/product/diy-smart-switch/basicr2/
…
-
### The problem
I have updated my sonoff basic today.
After the update the sonoff was not available anymore in home assistant.
I bit the bullet and crammed it out the corner in order to reflash…
-
It seems to be working, but can you guys help with testing?
See video here:
https://www.elektroda.com/rtvforum/viewtopic.php?p=20402248#20402248
-
- Operating System: Windoze 10 Home
- Python Version: 3.6.5
- Sonoff model: basic V1.55
[debug_1524956542.log](https://github.com/mirko/SonOTA/files/1967814/debug_1524956542.log)
[debug_15249537…
-
Hello,
I'm trying to turn a Sonoff Basic into a garage door controller. Here's what I did so far and and I just wanted to share. I'm sure this could be improved upon for all to benefit.
Modifi…