-
Hackoberfest is coming! To prepare, we're going to need to create some epics and good "getting started" work for new tscircuit contributors.
There are three main projects we'd like people to work o…
-
* https://github.com/sparkfun/SparkFun_u-blox_GNSS_Arduino_Library/blob/main/examples/Example22_PowerOff/Example22_PowerOff.ino
* https://learn.sparkfun.com/tutorials/gnss-receiver-breakout---max-m10…
-
I added a Third Party Index URL for Sparkfun: "https://raw.githubusercontent.com/sparkfun/Arduino_Boards/main/IDE_Board_Manager/package_sparkfun_index.json"
Whenever I try to select "Sparkfun" from…
-
Implement after touch for when a jack is in `PLUCKED` state.
Sparkfun has a good breakdown of the Controller values required.
https://learn.sparkfun.com/tutorials/midi-tutorial/advanced-messages…
-
I have an arduino nano v3 and a RFM69HW. Everything works fine, but when I set: `radio.setHighPower();` it gets blocked when I perform: `radio.send(TONODEID,sendbuffer,9);`.
The RFM69HW is fed usin…
-
Hi thanks for your great tutorial!!!
can this rfid chip read ufh tags Simultaneous like in the video shown at https://www.sparkfun.com/products/24738 the guy reads all his items placed in the bag?
-
Hi
I followed the tutorial fro the Sparkfun nRF52832 Breakout board, but the Sparkfun nrf52 library is not installed anymore
https://learn.sparkfun.com/tutorials/nrf52832-breakout-board-hookup-g…
-
I've configured everything as per tutorial, but looks like values reported to clound are 0.
Looks like everything is configured properly:
I have free plan. Is that only me or something cha…
-
Connected to a Futaba S3305 servo, the servo diddn't move. We connected an oscilloscope to the pin and found that there was no signal being sent on the pin. Through a little trial and error we figured…
-
Normal GPS is accurate to ~5m. Massachusetts has a network of stations which will give us much better precision.
- What do we need to do to get this working?
https://www.mass.gov/how-to/the-massa…