-
I think we can all give @TalalMash a huge thank you for this and SmoothWAN which were probably hugely instrumental in Speedify developing official OpenWRT support. Does this mean SmoothWAN and this u…
-
regular cap deploys are smart enough not to do much if there isn't much to be done - i.e. when the process gets to the compile phase, it actually doesn't change any of the assets that were previously …
-
This started occurring with a fresh install of Smoothwan a few weeks ago, on a Rpi4 1gb using the same usb-ethernet adapters and cables as prior config, and in troubleshooting I have tried swapping ca…
-
I have Speedify working on a Ubuntu 22.04 LTS Linux host without problems, and I use the speedify_cli command line to control it: the speedify UI never did work right.
If Speedify is installed corr…
-
Dear Tailscale team
Tailscale fails to send or receive traffic through Speedify when the latest's "IP Leak protection" is enabled -- its default setting. See https://speedify.com/blog/release-notes…
jucor updated
3 years ago
-
How I installed it (needed to use the sd card for space)
opkg update && \
opkg install block-mount kmod-fs-ext4 kmod-usb-storage e2fsprogs && \
umount /dev/sda1
mkfs.ext4 /dev/sda1
mkdir -p /…
-
I got an error code when installing the Unofficial Speedify on my GL-inet GL-X3000 router. A screen capture of the "EXecuting Package Manager" is attached along with a screen showing the System Status…
-
Hello, I installed your extension on Google Chrome tho, somehow it doesn't change the playback speed at all.
Actually I can see the functional logo here as this screenshot I attached, but practically…
-
A couple weeks ago I posted an issue/suggestion about enabling Sandify to allow input of two speeds, a slower one to preserve pattern detail while drawing, and a faster one to reduce time spent travel…
-
Since I see there is a new collaborator I will post this idea here. I've been using a service called Speedify recently and it seems to balance the load between my two connections depending on the band…