-
I have tested the simple example for SPI using the same BME280 you recommended.
It is not working - the error is "unknown model"
Linux kernel: Linux 6.6.31+rpt-rpi-v8 aarch64
Setup using r…
-
Hello,
I'm interesting in exploring a solution to the power draw issue, but I noticed that the instructions were never updated for doing an SPI install. I may design a QSB for this, but it would be…
-
Hi,
Thanks for the library. I've got it working with STMH755ZIQ. One of the problems i faced was , when i setup SPI configuration based on the read me which is
clock polarity (CPOL) = High
clo…
-
I have a small board that has 2 devices attached to the same SPI bus
* AD9833 DDS that uses SPI MODE 2
* MCP41010 Digital Potentiometer that can use SPI MODE 0 or MODE 3
Each device has its own C…
-
SPI.h library allows you to communicate with SPI devices, a feature on all Arduino and ESP8266 boards. SPI is a communication protocol for reading/sending data to/from devices.
References:
SPI tutor…
-
I wrote this description English & Korean
__UWB Question__
---
__Greetings__
---
Hello, I am a student currently taking an embedded course in an educational program called "Samsung Youth SW…
-
I can't upload because i am getting this error:
...\Arduino\libraries\m5stick-shark-main/SD.h:6:12: fatal error: SPI.h: No such file or directory
#include
^~~~~~~
compilation ter…
-
Hello - We're looking to access the sd card via spi_fatfs (similar to `allon_sensor_tflm_fatfs`) while use the freertos OS. It appears all of the sample `spi_fatfs.c` are using the eventlibrary, and …
-
Is this project still supported? Can I expect SPI support in a month or two?
-
A recent porting project highlighted a potential deficiency in the SPI Rev A driver. The baseline project is heavily interrupt driven and utilized the SPI bus. At points in time, the SPI callback fu…