-
I am using an SPI LCD screen, one of the operations is to full the screen, which is actually writing the same color data as the number of pixels on the screen.
Using the SPL library, the SPI DMA ch…
-
### What happened?
On ESP32-S2, the CMT2300A and W5500 are not working when they run on `SPI3`.
### To Reproduce Bug
Configure a CMT and/or W5500 on an ESP32-S2 running OpenDTU version 24.9.2…
-
Breadboard build only works with a single radio attatched to the spi channel. Built with nodemcu wroom32 and using nrf24l01 + modules and breakout boards. I have only a single channel scope so I am un…
-
Thank you very much for your effort. I'm testing transmitting EPG logos with OpenDigitalRadio. I created a multiplex with 2 channels and created the SPI with 4 logos each with ODR-Bridge-EPG.
For d…
-
Trying to use ADC122S101
when read(0) and read(1) getting around same number like what connected to pin5(IN1).
When connect to pin4 (IN2) measurement not equal at all to IN2
Please advice
-
Hello all,
i have a problem with a rotary encoder. I have try all the codes that is for encoders and always i receive the same result.
I receive the same result when rotate left or right.
I have …
-
Call machine.Sdcard (slot = 2, miso = pin (36), MoSi = pin (35), SCK = pin (37), CS = pin (38)) on espressif esp32-s3 development board reports an error:
_[0;31mE (8250) spi: spi_bus_initialize(762…
-
Hi! I have been trying to use your library on an Embassy project, with SPI, but so far it has been impossible for me to make it. Relevant information:
Cargo.toml:
```
icm20948-async = { git = "ht…
-
The LTC2325-16 is Quad, 16-Bit, 5Msps/Ch Simultaneous Sampling ADC.
The LTC2325-16 has a high speed SPI-compatible serial interface that supports CMOS or LVDS. The fast 5Msps per channel throughput.
-
I have buyed two 8 channel 24 MHz Saelae compatible logic analizers
Current available software do not allows to have both pluged into USB at the same time
So I am using 2 PC when I need more t…