-
grblHAL reports the spindle just fine
```
0 - PWM
1 - Huanyang v1, enabled as spindle 0, active
2 - Huanyang P2A
3 - Durapulse GS20
4 - Yalang YS620
5 - MODVFD
6 - H-100
7 - Nowforever
ok
…
-
### Version
2.1.7
### Hardware / Firmware
GRBL 1.1
### What happened
I have had this issue repeatedly. However, previous fixes are not working this time.
USG is controlling my genmitsu 6050 pro…
-
Guys,
wondering what is the max spindle encoder pulses per second that can be processed by TI microprocessor hardware? I can see nice magnetic encoder rings available. The one that is big enough for …
-
Looks like there is a problem with the spindle selection drop down. I have a PWM (laser) and a VFD spindle connected. Using the $Spindle command I can see:
$spindles
0 - PWM, enabled as spindle 1
…
-
It seems that when spindle linearization is enabled, the values of $31 (Setting_RpmMin) and $35 (Setting_PWMMinValue), are not used for computing the conversion from pwm_data to pwm_value.
https://…
-
### Is your feature request related to a problem? Please describe.
I have an external Spindle Driver for standard brushed type DC motor I would like to use.
- I need to be able to set M3 using the…
-
Challenge : I have a problem with how the spectral signal looks like.
Find out for more on the statistics of the spindle characteristics.
-
I have a Sain Smart 3020 Pro V2 CNC machine
and after updating to a bigger spindle,
and when connecting to Candle,
it shows error message in terms of spindle
(because unlike before, right now I only c…
-
### Is your feature request related to a problem? Please describe.
Currently, `M950 R0` with 3 pins defined treats the first as PWM speed output, the second as 'spindle on/off' and the third as 'spin…
-
Hi Terje Io
after the Stepper Spindle do you intend to write a plugin for AC Servo controlled in Modbus to be used as a spindle? I attach you manual (see Chapter 9) and a code for Arduino Nano as an …