-
Hi al almost complete n00b here. Did anyone find and had succes with controlling these Splitboards with ADC (potentiometers). Im try to build a hovercart type thing.
-
Does anyone knows this board? I can unlock and download this one but it does not work right now. The Power is only on as long as I hold the button.
![IMG_3702](https://user-images.githubusercontent…
-
Im preety sure that there should be ifdef debug for that. Actually its clamped to -300 and 300. I spend smth like 5 hours figuring this out haha
from
https://github.com/RoboDurden/Hoverboard-Firmw…
-
Just wondering if you are planning to add FOC and torque mode like the Eferu project, or if you know of any FOC algorithm implemented for the GD32F130C8T6.
If not, I might want to try "merging" you…
-
I would like to control 2 hoverboard motors for a custom wheelchair project using web interface . I already have simple web interface for ESP32 microcontroller which is simple joystick which output 2…
-
As per https://github.com/Candas1/Split_Hoverboard_SimpleFOC/issues/1#issuecomment-1596307195, there is a serious problem with the timer initialization
I'm opening this as a work item.
-
Hi,
Thanks again for this project.
I am testing same arduino code on similar boards with STM32F103C8 and GD12F130C6 chips.
As I am adding more code/features, I am getting this message on the GD32…
-
I understood it is Not possibile to backup original firmware due to memory lock. After unlocking the Arm and playing with this modified firmware, could I later flash a firmware that allows me to use …
-
Touring bracket and heel riser insert pattern - in inches.....
Splitboard insert pattern for mounting Voile pucks - this is not 40x40mm its actually in inches!!!
The cut down the middle!!!!! So the …