-
I have a program on Atmega328p with platformio and am trying to connect an OLED display with SSD1327 driver.
I include the libs from olikraus:
```
#include
#include
```
and set
`U8X8_…
-
I've had wonderful results using Writer with an 0.96" OLED.
The 1.5" driver (SSD1327) looks similar and appears to use framebuf, but I can't seem to get it to work.
Has anyone had any success ma…
-
Hello Mike,
i am trying to initialize this with HS i2c in RPi Pico, but no success, only on SW...
i have 128x128 display, with SW it works ok, but slow
in samples and documentation i cannot see h…
-
I saw in the list of supported Oled displays that SSD1327 is supported but it is not mentioned if it is SPI or I2C.
Also what code number should be used to enable it sys.lcd("x")?
thansks
-
The I2C and SPI HandleTypeDef pointers are labeled as "ssd1337_i2c" and "ssd1337_spi" respectively. I could not find anything regarding the existence of SSD1337 drivers in general, or any intent that …
-
I want to use the SSD1327 based 128x128 Grayscale OLED breakout over I2C.
Would I just clone the SSD1306 driver and modify it?
I have the SSD1306 working with the Adafruit Feather M4.
-
I'm using a MKR1000, and tried for UNO aswell.
I made the modifications indicated in previous issue #0afd522, both in I2C_Demo.ino and in ssd1327.cpp but got a this error message :
`
C:\Users\xxx\…
-
Hi, I am having an issue where the menu only draws once after uploading my sketch.
After uploading, I can see the menu displayed on the OLED display. When I turn the encoder, nothing changes.
At the…
-
I have been using display.printFixedN(... FONT_SIZE_2X) and display.printFixed(..., STYLE_BOLD) with the SSD1306. However, with the larger SSD1327 this seems not to work. In short: It would be helpful…
-
Reference link 1: [How to set contrast on a 128x128 px (ssd1327) oled display 1](https://forum.arduino.cc/t/how-to-set-contrast-on-a-128x128-px-ssd1327-oled-display/582049)
Reference link 2: [SSD1306…