-
I've been trying for the last couple of hours to get Octolapse to work with my A30 in order to get some nice stabilized timelapses.
I had to give up now, after finding out that the firmware of the A3…
-
#### Version of Octolapse
Octolapse Version: v0.4.0rc1.dev4
#### Version of OctoPrint
OctoPrint Version: OctoPrint 1.3.12 running on OctoPi 0.17.0 H
#### When you ran into the p…
-
FilamentManager 1.9.1 on Octoprint 1.7.3 seems to be responsible for multiple inappropriate pauses in consquitive prints. Prints are interrupted by message "M0 command blocked" (there were no M0 comm…
-
#### If this is a feature request describe it here
___REPLACE_THIS__FEATURE_REQUEST_DESCRIPTION_GOES_HERE
#### Version of Octolapse
Octolapse Version: 0.4.0
#### Version of Octo…
-
First, very nice project! Thank you for your time and effort.
# Background
I have been testing compatibility with an [Octoprint plugin I wrote](https://github.com/FormerLurker/Octolapse/) in pr…
-
#### If this is a feature request describe it here
no
#### Version of Octolapse
Octolapse Version: 0.18
#### Version of OctoPrint
OctoPrint Version: 1.5.3
#### When …
-
#### If this is a feature request describe it here
FEATURE_REQUEST_DESCRIPTION_GOES_HERE
#### Version of Octolapse
Octolapse Version: Octolapse 0.3.4
#### Version of OctoPrint
…
-
#### If this is a feature request describe it here
FEATURE_REQUEST_DESCRIPTION_GOES_HERE
#### Version of Octolapse
Octolapse Version: 0.3.4
#### Version of OctoPrint
OctoPrin…
-
Hello,
I just ran an octolapse with a vase, spiralized outer contour, and had it smooth the Z, so I just had octolapse take a snap every .2mm layer height. When it did this, a slight blob would form …
-
So hey bro, I made a video to show you what this is doing. It’s in test mode and it runs through but when it moves to the right side it’s naps a shot. I don’t know where the shot goes though. Before i…