-
### What happened
I have hybrid hardware, and it was initially enabled, but due to doing some debugging I set it to CoreXY mode.
Rather than changing my wiring, instead when I changed to corexy, I…
evilC updated
2 weeks ago
-
Hello everybody.
If you want to use a 3MS or BoxTurtle mmu, then there is a need for a board with a sufficient number of stepper motor drivers. Thus: how many colors are there - so many stepper motor…
-
I have a fresh cloned repository (with all submodules of course), but I ran into some issues.
The goal:
- a 4-axis CNC with the btt skr mini e3 v2.0 board
- swap Y and Z axis, as the boards defaul…
-
When I read the "Stepper Motor Tweaks" changes it seemed like a great idea. I purchased a very good quality 80mm fan with the same connector so no wiring changes. I printed the new mount and fitted …
-
Hi @MicroBahner,
Since many stepper motor drivers must be controlled by Open Drain output, it would be great to support this. Currently, I achieved this by changing some lines in the "src\utilities…
-
I have a doubt about the stepper motor driver code sir. Could you please send me your email id. My email id is jagadeeshbalaji21@gmail.com
-
**Describe the problem you have/What new integration you would like**
It would be nice to have advanced support for Trinamic's TMC series of stepper motor drivers. They would be a significant _…
-
**Is your feature request related to a problem? Please describe.**
I as an firmware developer wants to see any kind of integration of the [TMC-API](https://github.com/trinamic/TMC-API) as Zephyr mo…
rexut updated
2 weeks ago
-
Stepper motor driver ULN2003 in simulation.
-
### Wiki Search Terms
Axis setup, Testing movements, Testing enable motors.
### Controller Board
6x CNC Controller v1.2
### Machine Description
Gantry router XYZY, hardwired to DRV8825 drivers on…