-
Hi,
I am going to build your RGB2HDMI FlashFloppy OSD Project but I don’t know how to build the firmware for the STM.
Is there a prebuild binary available from your end?
And do you have any pla…
-
- [ ] Erzeugen einer STM kompatiblen, neuen PLECS Datei für unseren Wechselrichter
- [ ] Diskretes samplen von $I_c$ simulieren wie in _Simulation Kondensatorstrom-Sampling beschrieben_
Im external …
-
First, let's update all from packs:
- [x] C0
- [x] F0: #2570
- [x] F1: #2570
- [x] F2: #2570
- [x] F3: https://github.com/probe-rs/probe-rs/pull/2552
- [x] F4: #2629
- [x] F7: #2630
…
-
There seems to be a problem with printing of return values:
```bash
$ cat > incomplete_comp.mli type 'a t
> (*@ model contents : 'a list *)
>
> val make : unit -> 'a t
> (*@ t = make ()
> …
-
Hi,
I'm using LIS2DUX12 accelerometer in a Linux environment with kernel version 5.10 and I'm testing event monitoring with `iio_event_monitor` tool. I managed to verify the functionality of a few ev…
-
Hi folks, I'm trying to use the hal and just realized it doesn't seem to support the `lsm6dsv32x` sensor, only the 16x. What would involve adding support for the 32x?
I've tried adding it to `Sens…
-
**Submitting author:** @ceds92 (Julian Ceddia)
**Repository:** https://github.com/New-Horizons-SPM/scanbot
**Branch with paper.md** (empty if default branch): joss
**Version:** v2.0.0
**Editor:** @zhu…
-
你好,看了论文中的STM,有个别地方不是特别明白,想看一下STM代码学习一下,但我在master中没有找到,请问在哪里能找到呢,谢谢!
-
[RFC](https://github.com/redpanda-data/redpanda/pull/3662)
JIRA Link: [CORE-917](https://redpandadata.atlassian.net/browse/CORE-917)
[CORE-917]: https://redpandadata.atlassian.net/browse/CORE-917?at…
-
i flashed the bluepill with freejoy and read config from device which gave me 4 button gnd and 4 axis when i connected my limit switch to the board the button in button config section is showing green…