-
Hi to your support team.
I am currently trying to build CFORTH for an STM32F103C8T6 clone. This STM32F103C8T6 was tested with Mecristp-Diagnostic and it has 128K of flash and is a true STM32F108C8T6 …
-
After tying to write with C and seeing that it was to hard, we wanted to write with HAL, but we saw that it was too broad.
We started reading a very helpful book- "Discovering the STM32 Microcontrol…
-
Hi, what version of gcc-arm-none-eabi is required to build this?
I've tried 8.2.0 on arch and it gives me this:
```
Linking: nitrokey-pro-firmware.elf
arm-none-eabi-gcc -mthumb -mcpu=cortex-m3 …
-
Hello,
I'm using windows 7 and GNU ARM Embedded Toolchain from launch pad, and peripheral lib v3.5
I'm getting the following error.
`
D:\STM32\STM32-Template\Demo>make
C:\Program Files (x86…
-
when typed "make" ... ends to this:
/home/peyman/toolchain/Sourcery/bin/arm-none-eabi-gcc -T../stm32f100.ld -mthumb -mcpu=cortex-m3 -o BlinkingLights.elf startup_stm32f10x.o system_stm32f10x.o ma…
-
Hello, I am following along with your book "Discovering the STM32 Microcontroller". On page 49 there is instruction to type "make" in the demo folder. The stm32f10x.h file cannot be found despite Make…
-
We found that the reference manual was a little bit hard to understand there for searching for code that implemented I2C and compared them to each other and to the reference manual.
_**Here are the…
-
Currently, I can pass multiple cross-files to meson and this will merge their content, but there is a problem which is this will cause the command to be very long, and a lot of these cross-files are t…
-
当没有使用FAST READ功能时,下面代码段产生Comparision of unsigned integer with zero告警
for (i = 0; i < SFUD_READ_DUMMY_BYTE_CNT; i++) {
cmd_data[cmd_size] = SFUD_DUMMY_DATA;
…
-
Hi,
When I go to compile the script I get this error and there is no solutions on the internet..
#error "Please select first the target STM32F10x device used in your application (in stm32f10x.h file…