-
hi guys
I'm getting an AVR/io.h error when compiling and it looks like my board may not be compatible.
Although I'm not sure as I found some old forum posts saying it was resolved but they didn't …
zytra updated
2 years ago
-
#### Description
Example: Cannot run gnrc_networking application for stm32f4-discovery board + mrf24j40 driver.
#### Steps to reproduce the issue
Basically compile and flash the example to th…
-
Hi,
Your readme is really fantastic, better than Felix :) Thanks.
Can you pls show me what do i need to change for porting this sw to STM32F4 Discovery evaluation board? I guess linker and pinou…
-
Hello, I managed to compile the demo and after flashing to the board it is not working.
I connected the 3.5mm jack output to speakers and midi keyboard to USB on the board.
I pressed and hold user b…
-
Здравствуте!
Пытаюсь загрузить тестовый проект на отладочную плату stm32f4-discovery. Выбираю в свойствах проекта целевую платформу выбираю yaplc. Заливаю hex на плату, и ничего не происходит. Что я …
-
I followed the steps on [Blinky, your “Hello World!”, on STM32F4-Discovery](https://mynewt.apache.org/latest/tutorials/blinky/blinky_stm32f4disc.html).
And every step's result looks fine.
But do…
-
Hi all,
I have succesfully compiled the binaries of NETMF.
I have these two boards in the title.
I would like to connect my USB weather station WMR88(usb HID protocol) to the discovery board and tran…
-
I have added the timer in the stm32f4 repl file using below commands
`timer2: Timers.STM32_Timer @ sysbus `
` -> nvic@28`
But the timer is not working and the console prints a WARNING message …
-
I try to flash CircuitPython STM32F407 Discovery kit firmware [https://downloads.circuitpython.org/bin/stm32f4_discovery/en_US/adafruit-circuitpython-stm32f4_discovery-en_US-5.3.1.bin](url)
to MCUDEV…
-
Call me thick, but after having compiled the FW, SDK and deployed as usual. I wanted to make my first blinky and it kind of surprised me that VS2013 did not recognize the device neither did MFDeploy 4…